Powered Air-Purifying Respirator Systems and Parts
Powered air-purifying respirator (PAPR) systems and parts for hospitals, surgery centers, laboratories and infection prevention programs. Complete PAPR kits, blower units, belts, breathing tubes, batteries, chargers and airflow indicators from the 3M Versaflo and Bullard lines. Systems pair a battery-powered blower with filters and a hood or headcover for loose-fitting powered protection. Replacement parts stocked to keep deployed units in service. Case quantities for facility respiratory protection programs. Wholesale case pricing for infection prevention and procurement.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PAPR Systems and Parts for Facility Programs
A powered air-purifying respirator uses a battery blower to draw air through a filter and push it to a hood, headcover or tight-fitting facepiece. The powered airflow means a loose-fitting hood does not need a face seal, which is why PAPRs are kept in a respiratory protection program for wearers who cannot pass a tight facepiece fit test or who need extended wear. This page covers the PAPR blower units, wearable components and replacement parts stocked; the hoods themselves are covered in the hoods and cleaning accessories section.
PAPR Components Stocked
- Blower units - The battery-powered turbo unit that moves filtered air, worn on a belt. The 3M Versaflo TR-300 and TR-600 series and Bullard units are widely stocked.
- Complete PAPR kits - Bundled starter kits with a blower, battery, charger, belt, breathing tube and airflow indicator to stand up a program unit.
- Batteries and chargers - Rechargeable battery packs and single and multi-bay chargers to keep units cycling through a shift.
- Breathing tubes and covers - Breathing tubes that connect the blower to the headcover, plus tube covers, in standard and self-adjusting lengths.
- Belts and airflow indicators - Standard and easy-clean belts, and airflow indicators used to verify the unit is delivering rated airflow before use.
PAPR Parts and Compatibility
| Component | Function | Representative Line | Notes |
|---|---|---|---|
| Blower unit | Powered filtered airflow | 3M Versaflo TR-300 / TR-600 | Belt-worn turbo |
| Battery and charger | Power and recharge | 3M Versaflo, Bullard | Single and multi-bay chargers |
| Breathing tube | Blower to headcover | 3M Versaflo | Standard and self-adjusting |
| Belt | Carries blower | 3M Versaflo | Standard and easy-clean |
| Airflow indicator | Pre-use airflow check | 3M Versaflo | Verifies rated flow |
System Compatibility
PAPR components are matched within a system family - a Versaflo blower pairs with Versaflo batteries, breathing tubes, filters and headcovers rated for that unit, and the same holds for Bullard. Mixing components across families is not supported, so matching replacement parts to the deployed blower line keeps units in approved configuration. This is a descriptive compatibility note; facilities follow the manufacturer user instructions and their own program for assembly and use.
PAPR blower units are durable equipment kept on an asset and replacement cycle, while batteries, breathing tubes and belts are recurring replacement parts as units cycle through cleaning and shifts. Sourcing the blower line and its matched parts from one wholesale account keeps deployed units in approved configuration and shortens the parts list for infection prevention. Order at the best Wholesale Prices with MAP Medical.
Frequently Asked Questions
What is included in a complete PAPR kit?
A complete PAPR starter kit typically bundles the battery-powered blower unit, a rechargeable battery, a charger, a belt, a breathing tube and an airflow indicator, giving a facility one assembled program unit. Filters and the hood or headcover are matched separately to the task and wearer. The 3M Versaflo TR-300 and TR-600 kits and Bullard kits are common starting points.
What is the difference between the 3M Versaflo TR-300 and TR-600?
Both are belt-worn PAPR blower units in the 3M Versaflo family. The TR-600 is the higher-specification unit with additional filter compatibility and cleaning and decontamination features, while the TR-300 series is the lighter-duty unit for general use. Batteries, breathing tubes and headcovers are matched within the Versaflo family. Contact the team to confirm the current configuration and compatible parts.
Which PAPR replacement parts are stocked?
Stocked replacement parts include rechargeable batteries, single and multi-bay chargers, standard and self-adjusting breathing tubes and tube covers, standard and easy-clean belts, and airflow indicators for pre-use checks. Parts are matched within a system family such as 3M Versaflo or Bullard. Contact the team with the blower model to match compatible parts.
Can hospitals order PAPR systems and parts in bulk?
Yes. PAPR blower units, kits and replacement parts are stocked in case quantities for hospitals, surgery centers, laboratories and licensed distributors. Standing order programs are available for high-turnover parts such as batteries and breathing tubes. Contact the procurement team for tiered case pricing and standing order setup on PAPR components.
What PAPR products should be in a facility formulary?
A PAPR formulary typically standardizes on one blower system family, a set of spare batteries and chargers sized to the fleet, breathing tubes and belts as recurring spares, airflow indicators, and matched filters and headcovers. Standardizing on one family keeps parts compatible across deployed units. MAP Medical builds consolidated PAPR packages matched to program size - contact the team for an assessment.