Mounting Hardware and Brackets for Medical Equipment
Mounting hardware and brackets for pumps, monitors, displays and medical devices - wall, rail, pole and cart mounts, articulating arms, pole clamps and channel and rail systems from lines such as GCX and Ergotron. Available in fixed and articulating configurations for point-of-care mounting in patient rooms, procedure areas and nurse stations. Stocked for biomedical and facilities teams. Wholesale and volume pricing on mounting hardware for equipment installation procurement.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mounting Hardware and Brackets for Point-of-Care Equipment
Mounting hardware and brackets position pumps, monitors, displays and devices at the point of care on walls, rails, poles and carts. This subcategory groups the mounts, arms, clamps and rail systems used to install medical equipment. Products are described by mount type and equipment compatibility, in fixed and articulating configurations.
Mounting Hardware Categories Stocked
- Wall mounts - Fixed and articulating wall mounts for monitors, displays and devices in patient rooms and procedure areas. GCX and Ergotron wall mount lines are represented here.
- Rail and channel mounts - Bed-rail, wall-rail and channel-mount brackets that attach pumps and devices to standard rail systems.
- Pole clamps and mounts - Pole clamps and brackets that attach pumps, monitors and baskets to IV poles and roll stands.
- Cart mounts and arms - Cart-mounted arms and brackets for computers, monitors and devices on workstations and carts.
- Articulating arms - Extension and articulating arms that position monitors and displays at the point of care.
- Mounting plates and adapters - VESA plates, device-specific adapters and mounting hardware that connect equipment to mounts.
Mounting Hardware Comparison
| Mount Type | Attaches To | Configuration | Typical Load |
|---|---|---|---|
| Wall mount | Wall | Fixed or articulating | Monitors, displays |
| Rail mount | Bed or wall rail | Fixed | Pumps, devices |
| Pole clamp | IV pole | Fixed | Pumps, baskets |
| Cart mount | Cart or workstation | Arm | Computers, monitors |
| Articulating arm | Wall or cart | Articulating | Monitors, displays |
Mounting hardware and brackets are installed during buildouts and technology refreshes and reordered as devices and displays are added or relocated. Because mounts are specified per device and per room, facilities buy them in project quantities for new installations and keep common clamps and adapters on standing orders, so both project and case pricing apply. Order at the best Wholesale Prices with MAP Medical.
Frequently Asked Questions
What is the difference between fixed and articulating mounts?
Fixed mounts hold a device in one position on a wall, rail or pole, and are used where the device stays in place. Articulating mounts use arms and joints that let staff reposition a monitor or display at the point of care and fold it away when not in use. Both are stocked for monitors, displays, pumps and devices in a range of load ratings.
What mount types are available for pumps and monitors?
The catalog covers wall mounts, bed-rail and wall-rail mounts, pole clamps, cart mounts and articulating arms, along with VESA plates and device-specific adapters. Pumps commonly use rail and pole mounts, while monitors and displays use wall, cart and articulating arm mounts. Mount selection is based on the device, location and load.
Are mounting plates and adapters stocked separately?
Yes. VESA mounting plates, device-specific adapters and mounting hardware are stocked separately so facilities can connect a specific device to a chosen mount. This lets biomedical teams standardize on a mount system and adapt it to different equipment.
Can hospitals and facilities order mounting hardware and brackets in bulk?
Yes. Mounting hardware and brackets are stocked in case and volume quantities for hospitals, surgery centers, long-term care facilities, clinics and biomedical departments and licensed medical distributors. Multi-unit and standing orders cover repeat-buy consumables and parts, and project quantities are available for buildouts and equipment refreshes. Contact our procurement team for tiered case pricing, freight consolidation and standing order setup.
What mounting hardware and brackets should be in a facility formulary?
A facility mounting stock usually pairs wall and articulating mounts for monitors and displays, rail and pole mounts for pumps, cart mounts for workstations, and a stock of VESA plates, adapters and clamps for common devices. Quantities are specified per device and room. MAP Medical builds consolidated mounting packages matched to a facility's equipment and layout - contact our team for an assessment.