Medical Gas Fittings, Adapters and Quick Connects
Medical gas fittings, adapters and quick connects for hospitals, surgery centers and procedure suites. Stocked as DISS threaded fittings, push-to-connect quick couplers in Ohmeda, Chemetron and Puritan Bennett styles, adapters that convert between connector standards within a gas service, hose-end and equipment-end fittings, cylinder-to-pipeline adapters, and replacement gaskets and seals. Every component is gas-specific so oxygen, medical air, nitrous oxide, vacuum and other services stay separate. Components are listed by gas service and connector standard to match installed systems. Wholesale case and volume pricing for biomedical and materials management procurement.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Medical Gas Fittings, Adapters and Quick Connects
Fittings, adapters and quick connects link equipment to medical gas and vacuum outlets, hoses and cylinders. This subcategory covers DISS threaded fittings, manufacturer quick-connect couplers, and adapters that convert between connector standards within a gas service. Components are gas-specific so each service stays separate, and they are stocked by gas and connector standard.
Fitting and Connector Formats Stocked
- DISS threaded fittings - Diameter Index Safety System connectors for regulators, flowmeters and hose assemblies.
- Quick-connect couplers - Push-to-connect couplers in Ohmeda, Chemetron and Puritan Bennett styles.
- Connector-standard adapters - Adapters that convert between DISS and quick-connect styles within a gas service.
- Hose-end and equipment-end fittings - Fittings that terminate hose assemblies and connect equipment inlets.
- Cylinder and pipeline adapters - Adapters between cylinder connections and pipeline outlets.
- Gaskets, seals and washers - Replacement sealing components for gas connections.
Connector Type and Standard Comparison
| Connector Type | Connection | Common Standards | Gas-Specific |
|---|---|---|---|
| DISS fitting | Threaded | Diameter Index Safety System | Yes, per gas |
| Quick connect | Push-to-connect | Ohmeda, Chemetron, Puritan Bennett | Yes, per gas |
| Standard adapter | DISS to quick-connect | Within one gas | Yes, per gas |
| Cylinder adapter | Cylinder to pipeline | CGA, DISS | Yes, per gas |
Fittings, adapters and quick connects are a steady repeat-buy for biomedical departments, replaced as equipment is reconfigured and connectors wear. Because every connection is gas-specific and matched to the facility's connector standards, correct identification by gas and standard is central to sourcing, which makes standards-based stock and case pricing important for biomedical and materials management teams. Order at the best Wholesale Prices with MAP Medical.
Frequently Asked Questions
What is the difference between DISS fittings and quick connects?
DISS fittings are threaded Diameter Index Safety System connectors that thread together for a secured, gas-specific connection common on regulators, flowmeters and hose assemblies. Quick connects are push-to-connect couplers that snap equipment onto an outlet without threading, in manufacturer styles such as Ohmeda, Chemetron and Puritan Bennett. Both are gas-specific so a connector for one service will not mate with another.
Why are gas fittings and adapters gas-specific?
Gas-specific indexing keeps each medical gas service separate so equipment cannot be connected to the wrong gas. Each service - oxygen, medical air, nitrous oxide, vacuum and others - has a distinct thread, pin or coupler geometry. Adapters in the catalog convert between connector standards within the same gas service, for example a DISS-to-quick-connect adapter for oxygen, and are always matched to a single gas.
What adapters convert between connector standards?
The catalog stocks adapters that convert between DISS and manufacturer quick-connect styles within a gas service, hose-end and equipment-end adapters, cylinder-to-pipeline adapters, and gauge and fitting adapters. These let facilities connect equipment built for one connector standard to outlets or hoses built for another, always within the same gas. Providing the gas service and both connector styles helps match the correct adapter.
Can facilities order fittings, adapters and quick connects in bulk?
Yes. Fittings, adapters and quick connects are stocked in single units and full project quantities for hospitals, surgery centers, biomedical departments, procedure suites and licensed medical distributors. Multi-unit and full-facility orders are common for new construction, renovation and equipment refresh, and standing orders cover repeat-buy consumable items. Contact our procurement team for tiered case and project pricing, freight consolidation and standing order setup.
What fittings and connectors should be in a facility formulary?
A typical connector stock includes DISS fittings and gas-specific quick connects in the facility's connector standards for each gas service, adapters between DISS and quick-connect styles, hose-end and equipment-end fittings, and spare gaskets and seals. Stock follows the connector systems installed across the facility. MAP Medical builds consolidated fitting and connector packages matched to facility standards - contact our team for an assessment.